How to mix putty powder and what problems should we pay attention to in the process of mixing?

　　，在調配膩子的時候準備工作要先做到位。大家要準備一個適合電動攪拌的容器，并且一定要將它徹底的清潔干凈，同時為了確保攪拌均勻要使用低轉速高功率的電動攪拌器。準備工作做好以后，就可以開始調配了。進行調配的時候，要先加入一定量的水，然后倒入膩子粉進行攪拌，一般膩子粉和水的比重應該為1：0.5.現在一般用的都是耐水膩子粉，只用清水攪拌就行了。如果有些消費者購買的膩子粉在攪拌的時候還需要加入膠水的話，那一定不是耐水膩子。因為現在的耐水膩子在制作過程中已經加入了膠粘劑，使用的都是預糊化的淀粉，而非耐水膩子里面添加的都是含有甲醛的膠水，現在已經被淘汰了，所以大家在選購的時候為了家人的身體健康，一定要了解清楚。

　　First, when mixing putty, the preparation work should be done first. Everyone should prepare a container suitable for electric mixing, and it must be thoroughly clean, while in order to ensure the uniformity of mixing, the use of low speed and high power electric mixer. When the preparations are ready, the deployment can begin. When mixing, add a certain amount of water first, and then pour putty powder to mix. The proportion of putty powder and water should be 1:0.5. Now the common use is water-resistant putty powder, just mix with clean water. If the putty powder purchased by some consumers still needs glue when stirring, it must not be water-resistant putty. Because now the water-resistant putty has been added in the process of production adhesives, using pre-gelatinized starch, rather than water-resistant putty is added with glue containing formaldehyde, has now been eliminated, so when you choose to buy for the health of your family, we must understand clearly.

　　第二，大家要注意的是，攪拌的膩子漿不能太干，因為太干的話膩子粉中的添加劑不容易充分的溶解，粘接性會受到影響，而且在后期的使用過程中，也容易造成膩子層的開裂。并且膩子漿也不能太稀，過稀的膩子漿在粉刷的過程中容易造成浪費。所以大家攪拌的時候一定要注意

　　Second, we should pay attention to that the mixing putty pulp can not be too dry, because if it is too dry, the additives in putty powder are not easy to fully dissolve, adhesion will be affected, and in the later use process, it is easy to cause putty layer cracking. And putty pulp can not be too thin, too thin putty pulp in the process of painting is prone to waste. So when you stir, you must pay attention to it.

　　后，膩子充分的攪拌好以后，要靜置15-20分鐘的時間，這個過程就是為了讓膩子粉中的添加劑充分的溶解。在這里小編可以教給大家一個鑒別膩子粉的好壞的方法，那就是用膩子板進行攪拌，然后挑一點膩子漿在膩子板上，把板子反過來，膩子漿也不會掉的話，那就表示大家買的都是質量好的膩子，反之就是差一點的膩子了。

　　Finally, after the putty is fully stirred, it should be kept for 15-20 minutes. This process is to allow the additives in the putty powder to dissolve sufficiently. Here, Xiaobian can teach you a way to distinguish putty powder, that is, mix it with putty board, then pick a little putty pulp on the putty board, turn the board back, putty pulp will not fall off, that means that you buy putty of good quality, otherwise it is a little bit worse putty.

　　如果想要了解更多的話，比如濟南膩子粉等等，可以咨詢我們：http://m.daquanq.com.cn/我們會為你服務的!

　　If you want to know more, such as Jinan putty powder and so on, you can consult us: http://m.daquanq.com.cn/We will serve you!