Some of the common plastering mortar is common plastering mortar. It is also commonly used in the family decoration of some plastering mortar. Here plastering mortar is generally used for the bottom plastering of brick walls or the bottom plastering of concrete walls.

在磚墻的底層抹灰的時候多用石灰砂漿。而用于混凝土基層抹灰的砂漿，基本上都用的是混合砂漿。

Lime mortar is often used when plastering the bottom layer of brick wall. The mortar used for concrete base plastering is basically mixed mortar.

如果我們根據抹面砂漿的使用部位和功能來進行劃分，那么可以將抹面砂漿分為普通的抹面砂漿，裝飾砂漿，還有一些特殊功能的抹面砂漿。特殊功能的抹面砂漿主要是指的一些防水砂漿，絕熱砂漿，吸音砂漿，以及一些耐酸耐堿砂漿等等。

If we divide according to the using parts and functions of the plastering mortar, then we can divide the plastering mortar into ordinary plastering mortar, decorative mortar and some special function plastering mortar. Special function plastering mortar mainly refers to some waterproof mortar, insulation mortar, sound-absorbing mortar, and some acid and alkali resistant mortar, etc.

抹面砂漿，它是為了后期裝飾使用的。所以說抹面砂漿都要求具有很好的和易性。這樣他可以便于以后施工。第二點就是要求有較高的黏結力。這樣砂漿層與體面的基礎和以粘接牢固，能保證長期的不開裂，或者是出現空鼓脫落。第三點就是使用在潮濕環境或者是一些容易受外力作用的地方，還要具有較高的耐水性，還有強度。

Plastering mortar, which is used for later decoration. Therefore, plastering mortar is required to have good workability. It is convenient for him to carry out construction in the future. The second point is to require a higher bond strength. In this way, the mortar layer is firmly bonded to the surface foundation, which can ensure long-term non cracking or hollowing off. The third point is to use in humid environment or some places easy to be affected by external forces, but also has high water resistance and strength.

抹灰砂漿需要檢測的項目

Items to be tested for plastering mortar

成品的抹灰砂漿，在出廠以后都會配有出廠的小票。小票上會寫明檢查的項目。而且抹面砂漿會有相應的檢測報告。通過這些我們都可以發現，抹面砂漿主要檢測的項目有五項，也就是：砂漿的稠度，砂漿的保水率，抗壓強度，拉伸粘接強度。

The finished plastering mortar will be provided with a small ticket after leaving the factory. The inspection items will be indicated on the small ticket. And plastering mortar will have corresponding test report. Through these we can find that the main testing items of plastering mortar are five, that is: mortar consistency, mortar water retention rate, compressive strength, tensile bond strength.

抹面砂漿針對以上的項目都需要進行檢測。檢測的要求是同一個生產廠家的，同一品種，同一等級，同一批號，且連續進場的砂漿。一般要求砂漿每50立方，做一個檢驗批，不足50立方時按照一個檢驗批來算。

Plastering mortar for the above items need to be tested. The inspection requirements are mortar of the same manufacturer, the same type, the same grade, the same batch number, and continuously entering the site. Generally, every 50 cubic meters of mortar is required to be an inspection lot. If it is less than 50 cubic meters, it shall be calculated as one inspection lot.
相關標簽：濟南抹面砂漿