What is high temperature resistant coating? High temperature resistant coating is also known as heat resistant coating. It needs to work in the environment of high temperature above 200 C for a long time, and can adhere to certain physical and chemical properties, so that the covered object can work normally in the high temperature environment, and is mainly used in the environment of high temperature, high frequency, insulation and low hygroscopicity.

　　耐高溫隔熱保溫涂料,采用特制的溶液精加工,可到達40℃至400℃的高溫環(huán)境,直接面對火焰隔絕高溫熱量,平安設備不受高溫影響.導熱系數0.032w /m.K,能有效抑止和屏蔽紅外輻射和熱傳導,隔熱抑止效率可達90%左右,能抑止高溫物體的熱輻射和熱損失,隔熱、耐壓、固化可再加工,直接涂在物體5mm-8mm即可.

　　High-temperature heat-resistant and heat-insulating coatings can be processed in a special solution, which can reach the high temperature environment of 40 to 400 degrees C. They are directly faced with flame to insulate high-temperature heat and safety equipment is not affected by high temperature. The thermal conductivity coefficient is 0.032w/m.K, which can effectively suppress and shield infrared radiation and heat conduction. The heat-insulating and heat-insulating efficiency can reach about 90%. It can suppress the heat radiation and heat loss of high-temperature objects, and heat-insulating, pressure-resisting and curing can be repeated. Processing, directly coated on the object 5mm-8mm.

　　高溫隔熱保溫涂料能夠在高溫、火中,高溫液體等環(huán)境維護掩蓋對象高溫、耐腐蝕、抗氧化、封鎖維護,涂層穩(wěn)定性耐磨性高,在高溫環(huán)境中與其他積極分子反響,運用壽命高達15年.

　　High-temperature thermal insulation coating can maintain the environment such as high temperature, fire, high-temperature liquid and so on. It can cover up the object with high temperature, corrosion resistance, oxidation resistance, blockade maintenance. The coating has high stability and wear resistance. It reacts with other activists in high temperature environment and has a service life of up to 15 years.

　　高溫隔熱涂料施工便當,壽命長,耐酸堿,抗老化,自潔,耐磨,能堅持基底不被水,液體,汽腐蝕,延長運用壽命的基質,能夠直接刷在高溫煙道、煙囪、混凝土、各種金屬、纖維外表,隔熱磚和其他表層.

　　High temperature heat insulation coatings have the advantages of convenient construction, long service life, acid and alkali resistance, anti-aging, self-cleaning and wear resistance. They can adhere to the substrate that is not corroded by water, liquid and vapor, and prolong service life. They can brush directly on the surface of high temperature flue, chimney, concrete, various metals, fibers, insulating bricks and other surfaces.

　　高溫防腐涂料涂裝應留意以下幾點:

　　Attention should be paid to the following points in the coating of high temperature anticorrosive coatings:

　　1、噴鋼外表必需徹底除油除銹,后噴砂處置,直到使鋼外表呈灰白色.

　　1. The appearance of spraying steel must be thoroughly removed from oil and rust, and finally sandblasted until the steel appearance is gray-white.

　　2、高溫防腐涂料運用前必需混合運用,攪拌平均,如有外來雜質應在過濾后運用.

　　2. High temperature anticorrosive coatings must be mixed before application, mixing equally. If there are foreign impurities, they should be used after filtration.

　　3、噴涂高溫防腐漆必需運用高溫漆專用稀釋劑稀釋至18-30秒停止,漆膜厚度普通在20-30微米之間為宜.

　　3. Spraying high-temperature anticorrosive paint must be diluted to 18-30 seconds by special diluent of high-temperature paint. The film thickness is usually between 20-30 microns.